Closure / Register Plate Kit - 1000mm x 500mm C/w Angle Brackets (x3)
Blank Sheet 
 
 
MATERIAL
1.5mm Galvanised Steel (NO HOLE CUT OUT)
APPLICATION
Use to seal off the base of the chimney.
(This Register Plate can be cut on-site to fit the base size of your chimney stack).
The Register Plate will support vermiculite and stop any debris within the chimney stack from coming down the chimney and hitting the appliance.
CONSTRUCTION
The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel.
The Register Plate can be sprayed to match the colour of your stove pipe.
INSTALLATION
Four supporting brackets can be cut to the length and width of the base of the chimney stack.
Drill some holes in the brackets. Now screw them into the brickwork.
Next, cut the Register Plate to the correct size, ensuring the pipe hole lies vertically above the Stove Pipe.
Drop the Register Plate onto the supporting brackets.
Now seal any gaps between the brickwork and the brackets/plate using Fire Cement or High-Temperature Sealant.